AktiMate Micro B

Introduced in November 2014, the big improvement over its predecessor (AktiMate Micro) was the removal of the iPod dock and the addition of Bluetooth. In 2017 it continues to have high demand.
Cosmetically it is noticeably different with the removal of the dock which had previously been concealed in the top of the active speaker - and the addition of a stylish aluminium tweeter ring.
The On/Off switch is located on the rear panel of the active speaker, and a blue LED lights above the volume knob when the system is on. The knob on the left hand front is a three position input selector for Bluetooth, USB (for PC playback) or 3.5mm jack plug input.
Winning awards as Desktop Speaker of the Year in both the UK and Australia, this speaker continues to impress with its versatility and dynamic sound.
All cables are supplied - these include 3.5mm and USB together with speaker cable to link the active and passive speakers

Specification

  • Configuration - 1 Active/1Passive (Slave) Speaker
  • Power Output - 40 W @ 1kHz into its own 4 Ohm load
  • Woofer - 100mm / 4” Kevlar design
  • Tweeter - 25mm soft dome - neodymium magnet - magnetically shielded
  • Frequency Response - Speaker:70Hz - 25KHz Amplifier:20Hz - 25KHz
  • Power Amplifier Type - Class D
  • DAC (Only on USB input) - TI PCM2704 16bit 48khz
  • Inputs - iPod dock plus 3.5mm jack line in
  • Connections - USB (PC Use Only) Bluetooth 4.0
  • Input Impedance - 10K Ohm
  • Passive speaker impedance - 4 Ohms
  • Protection - Temperature - Short circuit on output - Low & high voltage supply
  • Mains voltage - Universal 100 - 240V
  • Inclusions - Power cable, Speaker cable, 3.5mm jack cable, USB cable Banana plugs (2 red/2 black), Rubber feet, Manual
  • Dimensions W x D x H - 145 x 200 x 240 mm 5.7 x 7.87 x 9.45 ins
  • Finish - Black, Red or White high gloss
  • Weight - 6.95 Kg 8.2 Kg Packed
  • Packed - 1 pair / 1 carton
  • Warranty - 12 months - original purchaser only - applicable in country of purchase
  • TOP