Proxima Generation 3
Proxima forms a compact block. The main part of the structure consists of 4 layers: front back walls and 2 frames made of MDF with different thickness. They form the inner part of the side, top and bottom walls. From the outside, sides and top are covered with leather. These elements have a double function: dampening of cabinet vibrations and are a decorative part of the unique design of Proxima. Loudspeaker proportions were defined very carefully – the ratio of height to width is not random and it is chosen to make Proxima optically seem smaller than in reality, and despite its height of 120cm, not to dominate, even in a small listening rooms. With the use of multiple screws and mass damping, the decorative panel has been fixed to the front wall. It is the support for the woofer and also the cover of the tweeter and TMI (Tweeter Multilayer Isolation) system. The unusual shape of the decorative panel was created over many days by drawing and multiple “improving” each of the curves, matching the correct proportions to achieve the desired effect. Every detail has been drawn and made by hand, without using a computer. The convex crease that runs through the front and side panels recalls “sail in the wind” and complements the unique Proxima design. Carefully executed cabinet shape with leather finishing components results in a slim, graceful loudspeaker of unusual finesse. It will certainly be a great addition for any room. The front panel is complemented by speaker grilles fixed with neodymium magnets
![q1](https://referencepoint.in/wp-content/uploads/2021/09/q1.jpg)